By PIMA.
Fire codes, tests and standards currently set in place make up the requirements that all construction materials and assemblies – including plastic based ones like polyiso insulation – must adhere to. These layers of requirements ensure an acceptable level of safety for fire protection. The building codes that incorporate these requirements are maintained and revisited by groups of experts and important stakeholders who publish updated versions of the codes through a consensus-based process.
Polyiso insulation delivers a high level of inherent fire resistance when compared to other foam plastic insulations due to its unique structure of strong isocyanurate chemical bonds. These bonds result in improved high temperature resistance (up to 390 degrees F; more than twice the temperature resistance of other building insulation foams) which in turn leads to enhanced fire resistance. In addition, polyiso products form a protective surface char when exposed to a sufficient flame source. This physical property is exhibited in the ASTM E84 or “Steiner Tunnel” test, where polyiso insulation test specimens remain intact (i.e., do not melt or drip) during the test’s fire exposure. This performance characteristic further enhances polyiso’s fire resistance, especially in terms of flame spread and flashover potential.
Commercial roofs are subjected to full assembly fire testing; individual material components like polyiso insulation are required to meet additional product-specific fire performance criteria. Polyiso remains the only foam plastic insulation product for direct application to steel roof decks to earn FM Approval for Class 1 Roof Systems. An FM Class 1 designation means the roof assembly has been subjected to a series of tests in addition to external and internal fire exposure, including wind uplift, water leakage and impact resistance. As a result, direct-to-deck assemblies containing polyiso insulation meeting NFPA 276 (FM 4450) or UL 1256 standards can be installed without a thermal barrier. To date, hundreds of thousands of assemblies have gained approval under these test standards.
For additional technical information on the fire safety of roofing applications, please consult PIMA’s Technical Bulletin 100 Series – Roofing.
Exterior walls of any height on commercial buildings (IBC Types I-IV) that contain polyiso insulation (or any other foam plastic insulation) must be evaluated for full-assembly fire performance per NFPA 285. Foam plastic insulation products are also required to meet additional product-specific fire performance criteria for flame spread and smoke development. Polyiso’s exceptional fire performance provides building designers with important flexibility when selecting other components of exterior wall systems, including façade or cladding materials. A wide variety of exterior wall assemblies that combine polyiso insulation with MCM panels, brick and other popular materials have passed the rigorous, two-story NFPA 285 fire test. Note: Wall systems containing polyiso insulation may be subject to other fire tests and building code requirements. Consult your local building code and manufacturer installation instructions for more details.
For additional technical information on the fire safety of wall applications, please consult the Technical Bulletin 400 Series – Commercial Walls.
Learn more about PIMA in their RoofersCoffeeShop® Directory or visit www.polyiso.org.
Original article source: PIMA
RoofersCoffeeShop
Comments
Leave a Reply
Have an account? Login to leave a comment!
Sign In