Skip to main content
Translate
Default
English
Español
Français

User Access


egtest82124 Avatar
DaVinci -  Ad - Build Your Business: Learn How With Composite Roofing
Sika -  Ad - 5% Off
Malarkey-Dec--Ad-250x265
egtest82124 Avatar
All Points Tile -  Ad - Free Tile ID
asdf12
Translate
Default
English
Español
Français
Curtain Ad
Curtain Ad

Roofing in the Winter.

« Back To Roofers Talk
Author
Posts
February 13, 2014 at 6:46 a.m.

Old School

Its the same up here, but the snow just might stay on the ground for 2 months. Michigan weather goes like this, "If you don't like it, wait ten minutes and it will change."

February 12, 2014 at 9:23 p.m.

Chuck2

It's only been 2 hours since I created the post and the ground was just wet, now there's 4 inches of snow accumulation on the ground and by looking at the radar, it appears the snow showers should last another 2 hrs.

But it's supposed to be sunny and 47 degrees tomorrow so maybe all this will be gone by days end. Then within one week the temperatures are forecast to rise into the 70's.

Is mother nature on steroids or what's up?

February 12, 2014 at 7:26 p.m.

GSD

My repairs pick up quite a bit, instead of maintenance. so not only do we deal with the weather but so do all the other contractors and we all time everything to work depending on the weather. lets just say, we are all in agreement that this time of year isn't the best time to cut in a roof top unit. we'll wait till spring.

February 12, 2014 at 7:13 p.m.

Old School

It's really not that bad. We just don't do anything in the winter. I guess we have shoveled a few roofs this winter, but not much of anything since Dec 10. It doesn't look good for the next few weeks either.


« Back To Roofers Talk
You must be logged in to reply to this topic.

Geocel - Banner Ad - May 2022
Translate
Default
English
Español
Français

User Access


egtest82124 Avatar
Directory pinned ad
Everroof -  Ad - Podcast Promo
egtest82124 Avatar
Malarkey-Dec--Ad-250x265
Tuck - RCS - 2022 -
Leap -  Ad - Empowering Contractors

Loading…
Loading the web debug toolbar…
Attempt #