RoofersCoffeeShop https://www.rooferscoffeeshop.com/ Roofing Forum, Classifieds, Galleries and More! en-us The Key to a High Level of Waterproofing https://www.rooferscoffeeshop.com/post/the-key-to-a-high-level-of-waterproofing the-key-to-a-high-level-of-waterproofing Sun, 10 Apr 2022 06:00:00 PDT

By Cass Jacoby, RCS Reporter.  

Get a free sample of MFM’s ready-to-use Roof Deck Tape and start taking waterproofing the home to the next level. 

Often overlooked, sealing the seams on the substrate boards of steep-slope roofing projects is the key to waterproofing a roof. That is why several building code agencies have already implemented codes to seal these seams with a roof deck flashing tape. 

Far from an unnecessary extra step, sealing seams on the substrate board offers another level of protection against mother nature, providing value to the homeowner. Should the main roof fail, Roof Deck Tape will prevent water from entering the structure between the roof deck panels. 

Luckily, MFM Building Products Roof Deck Tape™ is the ready-to-use product that will prevent water, air and moisture from slipping through the cracks. This 40-mil, self-adhering tape is composed of a non-slip film coated with an aggressive asphalt-based adhesive system that won't crack or dry out. Further, Roof Deck Tape sticks to plywood, OSB, foam board, metal and most other roof deck materials so you can assure a good seal on the seams. 

MFM’s Roof Deck Tape™ self-seals around all roof fasteners, from nails to staples, maintaining a waterproof barrier. Simply start at the eave and work toward the ridge to provide an extra layer of water protection. 

The only tools needed for installation are a sharp utility knife, measuring tape, hand roller and any necessary safety equipment when working on a pitched roof. Plus, the textured outer surface provides good traction when working on the roof, making it easy to install a high-performing, watertight roof.  

MFM Roof Deck Tape is an easy and economical adhesive that prevents water from leaking into the building.  

Request a free sample of Roof Deck Tape today! 

Learn more about MFM Building Products in their RoofersCoffeeShop® Directory or visit mfmbp.com. 

]]> The Early 1900s Building That This Company Calls Home https://www.rooferscoffeeshop.com/post/the-early-1900s-building-that-this-company-calls-home the-early-1900s-building-that-this-company-calls-home Fri, 18 Mar 2022 18:00:00 PDT

By MFM Building Products.  

The Higgins Building (MFM Corporate Headquarters) is over a hundred years old, adding to the rich legacy of MFM Building Products. 

2021 marked the 60th anniversary for MFM Building Products. The company, founded in 1961, celebrated the longevity and legacy of their company, but their corporate headquarters have existed for nearly twice as long! The Eldridge-Higgins Building that MFM calls home is a historic building on the National Registry of historic places. With MFM’s Expansion Project in 2021 marking their 60th anniversary, new offices in the main headquarters building were constructed and a new, state-of-the-art Research & Development laboratory was added to the historic site MFM calls home. 

The Eldridge and Higgins Company purchased land in 1904 to construct a wholesale grocery warehouse. The location at 525 Orange Street, Coshocton, Ohio, was situated on two rail lines, which was advantageous at that time to readily move commerce. 

The architects of the project were Richards, McCarty & Bulford, from Columbus, Ohio. That firm was named by the General Service Administration as one of the “preeminent” architectural firms and a number of the firm’s works are listed on the National Register of Historical places. The Higgins Building was a three story, all brick structure, with a basement level. 

After seventeen years serving as a grocery warehouse, the building was turned into a manufacturing facility, and also served as a warehouse for a variety of local companies.

MFM purchased the building in 1966 due to its turn-of-the-century construction. The walls are solid brick; 24 inches thick at the basement level. MFM made several renovations to the facility to meet the needs of the growing company. All the renovations were done to preserve the integrity of the original structure.  

The first floor of the building contains MFM corporate offices and the balance has been used as warehouse space. In 2021, as part of the MFM Expansion Project, the second floor was converted to include additional offices, a state-of-the-art research and development laboratory, employee training area and records room. 

The Eldridge & Higgins Building, called the Higgins Building by MFM, was listed on the National Register of Historical Places on August 6, 1998. A bronze plaque near the front entrance of the building is in recognition of the craftsmen who constructed the original building in 1904. 

MFM has retained the Eldridge-Higgins Building’s integrity of location, design, materials, craftsmanship, setting, feeling and association. 

See the new expansion!

Learn more about MFM Building Products in their RoofersCoffeeShop® Directory or visit mfmbp.com. 

Original article source: MFM Building Products

]]> Replace the Time and Waste of Cutting Shingle Tabs! https://www.rooferscoffeeshop.com/post/replace-the-time-and-waste-of-cutting-shingle-tabs replace-the-time-and-waste-of-cutting-shingle-tabs Mon, 21 Feb 2022 15:00:00 PST

By MFM Building Products. 

ShingleStarter® is designed to make installing the first course a breeze, offering immediate protection. 

For years, roofing contractors have relied on cutting 3-tab shingles down to make a starter course when installing an asphalt shingle roof. This is not only a waste of shingles, but is a process that is as costly as it is time-consuming. 

ShingleStarter®, manufactured by MFM Building Products, is an innovative, 50-mil shingle starter roll that features a peel-and-stick design for fast installation. The product is a black granulated surface laminated to an aggressive rubberized asphalt adhesive system, which can be placed directly onto the roof substrate or overtop common felt paper. It can even be applied over smooth surfaced self-adhering underlayments. 

Additionally, the ShingleStarter features a "sealing strip" that bonds to the shingles to prevent wind uplift at the roof edge. When installing in colder temperatures, the shingles may not adhere at first, but when temperatures warm, the sealing strip bonds to the underside of the shingle for complete waterproofing protection. This also means that when roofing fasteners are driven through it, the membrane will seal around the fastener to prevent any water intrusion.  

Not only does ShingleStarter provide the necessary waterproofing protection, but it also eliminates all the costs associated with cutting shingle tabs for the starter course. Installing the peel-and-stick membrane could save the contractor up to 50% or more in installation time. By covering the roof in a faster fashion, the sooner the entire structure will be protected from the elements. 

ShingleStarter is packaged in individual rolls that measure 7.2” x 33.5’. It meets the requirements of ASTM D 1970, is Miami-Dade County Approved, Florida Building Code FL 11842 and ICC-ES ESR-1737. ShingleStarter is made in the USA and features a five-year warranty. Start saving time and money with these shingle starters! 

Request a free sample today! 

Learn more about MFM Building Products in their RoofersCoffeeShop® Directory or visit mfmbp.com 

Original article source: MFM Building Products

]]> How to Save Time, Material and Money Installing a Starter Course https://www.rooferscoffeeshop.com/post/how-to-save-time-material-and-money-installing-a-starter-course how-to-save-time-material-and-money-installing-a-starter-course Thu, 17 Feb 2022 15:00:00 PST

By MFM Building Products.  

MFM Building Products’s ShingleStarter® is designed to quickly and effortlessly adhere to the drip edge for immediate protection. 

Making sure the roof edge is waterproofed is a huge step in preventing wind-driven rain from blowing under the shingles and damaging the roof deck. Traditionally, the way contractors have addressed this is by taking 3-tab singles and cutting off the tabs, then nailing the balance to the roof deck. This method is very time-consuming and still doesn’t prevent wind-driven rain from blowing under this starter course.  

ShingleStarter®, manufactured by MFM Building Products, is an innovative, 50-mil shingle starter roll that features a peel-and-stick design for fast installation. The granulated surface provides excellent foot traction to prevent falls and potential injury. 

ShingleStarter was developed to take advantage of today’s modern self-adhering (self-stick) technology and the need to reduce the labor, scrap and material costs associated with the traditional method of installing a starter course. The ShingleStarter roll installs quickly and easily along the roof edge. Simply install flush with the drip edge for immediate protection.  

Since the product is adhered directly to the roof substrate, this prevents any wind, rain or moisture from reaching the unprotected substrate. ShingleStarter is self-sealing so when the shingles are installed, the membrane will seal around the nail to maintain this waterproof barrier. Another feature of ShingleStarter is that it comes with a unique sealing strip on top of the membrane. This sealing strip adheres to the bottom of the installed shingles to prevent wind uplift along the roof edge.  

Not only does ShingleStarter provide the necessary waterproofing protection, but it also eliminates all the costs associated with cutting shingle tabs for the starter course. Installing the peel-and-stick membrane could save the contractor up to 50% or more in installation time. By covering the roof in a faster fashion, the sooner the entire structure will be protected from the elements. 

ShingleStarter can be used with either traditional 3-tab or architectural shingles. During installation, only install the amount of the ShingleStarter that will be covered by shingles that day. This prevents dust from settling on the sealing strip. Also during installation, the sealing strip should be closest to the roof edge. In colder temperatures, ShingleStarter can be mechanically attached or use MFM Low-VOC Spray Adhesive™ for better adhesion. 

ShingleStarter is packaged in individual rolls that measure 7.2” x 33.5’. It meets the requirements of ASTM D 1970, is Miami-Dade County Approved, Florida Building Code FL 11842 and ICC-ES ESR-1737. ShingleStarter is made in the USA and features a 5-year warranty. 

Request a free sample today! 

Learn more about MFM Building Products in their RoofersCoffeeShop® Directory or visit mfmbp.com 

Original article source: MFM Building Products

]]> RoofersCoffeeShop® Will Be at IRE 2022, Will You? https://www.rooferscoffeeshop.com/post/rooferscoffeeshop-will-be-at-ire-2022-will-you rooferscoffeeshop-will-be-at-ire-2022-will-you Mon, 17 Jan 2022 18:00:00 PST

By Cass Jacoby, RCS Reporter.  

IRE promises to be one of the biggest events of the year, check out who will be at the expo! 

This year’s International Roofing Expo (IRE) promises many exciting events, products, classes and more. The expo will take place February 1-3 in New Orleans at the Ernest N. Morial Convention Center.  

RoofersCoffeeShop® will be on the beat, sharing information and broadcasting live on YouTube. Additionally, you will find President Heidi J. Ellsworth moderating a panel on how to work with young people who are interested in roofing. The session takes place Tuesday at 7:45 a.m. - 9:15 a.m. CT 

The Coffee Shop will join many great manufacturers, distributors and associations as they share new ideas with roofing contractors. Make sure you stop by our booth, number 249, and visit our RoofersCoffeeShop partners too:  

Don’t miss out, register today for IRE 2022!

]]> How To Go Vertical https://www.rooferscoffeeshop.com/post/how-togovertical how-togovertical Mon, 17 Jan 2022 15:00:00 PST

By MFM Building Products. 

An underlayment that can take the heat, both on the roof and on the wall. 

One of the growing trends for building exteriors is metal wall panel systems and metal-capped parapet wall details. Just like metal roof systems, consideration needs to me made for the high amount of heat that is generated under metal in vertical installations. Contractors need to account for the heat buildup underneath metal panels that can affect the underlying materials.

Self-adhered underlayments must be high-temperature rated for use under these roof and sidewall systems. The enormous heat generated under these metal panels can cause a breakdown of the membrane’s top surface and/or cause the adhesive system to bleed out. As a result, the waterproofing properties can be compromised, which may lead to air, moisture or water to infiltrate into the building structure. 

For roofing applications, a self-adhered underlayment must meet ASTM D1970. This standard has a minimum thickness of 40 mils, which means that the membrane is heavier and will need to be secured in place. 

Depending on the building structure, a self-adhered underlayment may be installed in either a horizontal or vertical fashion. Both methods require that the membrane be secured in place. In a horizontal application, start at the bottom and back nail using button caps every 12” OC along the top edge of the material. The next course should have a minimum 3” side lap, which will cover the button caps. End laps require a minimum 6” overlap. Continue working up the structure, repeating the same step, until you reach the top. As added protection, a termination bar can be installed for the top course. 

In a vertical installation, again, start at the bottom of the wall and work towards the top. If the membrane does not reach the top, back nail button caps 12” OC. Use a 6” end lap to cover the row of button caps with a new section of underlayment. A termination bar must be installed at the top of each course. Once again, secure button caps 12” OC to adequately hold the membrane in place. Use a minimum of 3” side laps and 6” end laps as you continue to work across the wall. These overlap areas can conceal the button caps. 

Another aspect of ASTM D1970 is that the underlayment must be self-sealing around fasteners by demonstrating that the membrane has a “Pass” on Self-Sealability per ASTM D1970/ASTM D7349. In essence, the adhesive system will seal around the button caps to maintain a complete waterproofing barrier by showing no water on the substrate underside, on the fastener shank, or between the membrane and substrate. 

The last area of concern in that self-adhered underlayments are vapor barriers. If meeting ASTM E96, then the membrane demonstrates that is offers a moisture vapor permeance of ≤0.1 perms. As with any vapor barrier, the contractor must allow for proper ventilation of the wall system by leaving a minimum air gap of one inch. If the wall system uses a batten system, this will normally provide the necessary air ventilation space required. 

Other factors to consider in vertical applications 

Although self-adhering or self-stick roofing underlayments have been around for more than 30 years, this new application carries the same factors to consider before considering a product: 

  • Building codes – Know all applicable building codes for sidewall applications, as well as the manufacturer’s recommended installation instructions, prior to the installation. There are often minimum installation temperatures and UV exposure ratings to be considered. 

  • Product approvals – Self-adhered underlayments can be certified or comply with industry standards to ensure their performance on the jobsite. Always check to see if your project requires a code-approved product, and what that code specifies. 

  • Adhesion – Ensure that the substrate is clean, dry, and free of waxes, dirt or debris. Dust and dirt will impair the adhesive properties of the self-adhered membrane. Weathered surfaces require the use of a primer prior to installation to provide a clean and smooth surface. 

  • Eliminate gaps – Do not use the underlayment to bridge gaps in the substrate. Always use a flashing membrane or tape to seal the gap, then install the underlayment. 

  • Caulks and sealants – Caulks and sealants that contain plasticizers may react adversely to the adhesive system of the underlayment, which may cause the mastic to liquefy. It is the responsibility of the installer to ensure that the underlayment is compatible with any product it will come in contact with. 

  • Apply pressure – Applying sufficient pressure with a hand roller over the entire surface, paying special attention to any overlap areas. 

The most important aspect of self-adhering underlayments is that when installed correctly, they can provide the contractor with piece-of-mind by greatly reducing the number of call-backs to fix a leak or problem area. Information is readily available from the manufacture in the form of technical data sheets, installation instructions, installation videos and other sources such as social media and YouTube. 

By educating yourself and your customers, you may have the ability to secure new building projects that you were unaware of before. Listen and learn is the best way to understand what a project requires. Good luck. 

Get a free sample of Ultra HT Wind & Water Seal and see for yourself the possibilities a product engineered for whole roof protection can provide. 

Learn more about MFM Building Products in their RoofersCoffeeShop® Directory or visit mfmbp.com. 

]]> RoofersCoffeeShop® Welcomes MFM Building Products https://www.rooferscoffeeshop.com/post/rooferscoffeeshop-welcomes-mfm-building-products rooferscoffeeshop-welcomes-mfm-building-products Sat, 01 Jan 2022 09:00:00 PST

MFM Building Products is dedicated to quality and have a deep tradition of excellence in the manufacturing of exterior, self-adhering waterproof barriers for residential and commercial construction. 

RoofersCoffeeShop®, the award-winning place where the industry meets for technology, information and everyday business, is pleased to welcome MFM Building Products into its community for contractors.

MFM Building Products manufactures an entire "envelope" of weather barrier and accessory products. Plus, all of their products are easy to use, self-seal around fasteners and come with a rock-solid warranty. Their products are available nationwide through an extensive network of distributors and specialty building supply houses. 

This employee-owned (ESOP) manufacturing company has continued to grow and foster new product development, improved product performance and helped reduce overall costs with a value-based philosophy. With MFM Building Products you can expect: 

  • High product quality - All of MFM’s products are tested and re-tested to ensure that they exceed expectations for performance and reliability. MFM’s in-house testing facility and strict manufacturing practices are focused on providing our customers with a consistent product. 

  • Commitment to lowering costs - MFM continually investigates more effective materials and manufacturing procedures to keep their costs as low as possible. 

  • Easy installation - One way MFM provides their customers with the highest value is by eliminating additional steps or procedures that can significantly lower your labor and material costs to add more to the bottom line. 

  • Solutions - MFM features a skilled sales force that is knowledgeable and experienced in the construction industry and can recommend the right MFM product for your application. 

Above all, MFM Building Products is founded upon a pride in workmanship and desire to provide the highest quality products to their customers. 

RoofersCoffeeShop® is proud to welcome MFM Building Products! 

About MFM Building Products  

MFM Building Products, founded in 1961, is a manufacture of self-adhering waterproofing membranes for the residential and commercial roofing marketplace. Their product line includes low-slope roofing membranes, steep-slope roofing underlayments, window and door flashing tapes, above and below grade waterproofing membranes, roof flashing products, and specialty tapes. Roofing contractors depend on MFM’s experience and quality products to bring value to each and every project. Whether it is new construction, re-roofing or roof repair, our membranes provide complete waterproofing protection.

]]>