RoofersCoffeeShop https://www.rooferscoffeeshop.com/ Roofing Forum, Classifieds, Galleries and More! en-us Ditch the Pitch Pan and Get a Curb System That Works https://www.rooferscoffeeshop.com/post/ditch-the-pitch-pan-and-get-a-curb-system-that-works ditch-the-pitch-pan-and-get-a-curb-system-that-works Thu, 07 Apr 2022 18:00:00 PDT

By Colin Sheehan, RCS Reporter. 

Replace your old-fashioned metal pitch pans with these highly versatile,1-part polyether pourable sealants. 

The precast components in these E-Curb® penetration sealants will completely eliminate your need for pitch pans. Unlike traditional pitch pans, Chem Link’s adaptable E-Curb System can be installed in under 15 minutes and does not require flashing or mechanical attachment.  

E-Curbs are designed to be used in conjunction with the following: 

  • Granulated modified bitumen 

  • Asphalt 

  • Coal tar built-up roofing (BUR)  

E-Curbs are specified for the following single-ply roofing membranes: 

  • PVC 

  • EPDM 

  • PIB 

  • TPO  

E-Curbs are an excellent sealant choice for sealing penetrations around solar panel mounts, HVAC, electrical and structural supports.  

Before installation 

All surfaces that the sealant will be bonded to should be completely free from any contaminants that may worsen the sealant’s performance. Surfaces should be clean and dry. Clear away all previously applied products such as caulk, mastic, cement, asphalt, pitch pans, loose granules or gravel and all other substances with a wire brush. Isopropyl alcohol is an effective cleaner for sticky surfaces and will prepare your surface for an E-Curb installation. 

For installing in temperatures below 32°F (0°C), contact a customer service representative for detailed application guidelines.  

You mustn’t use E-Curbs on TPO roofs without using a TPO primer. Additionally, E-Curbs cannot be applied on Hypalon, and smooth APP membranes require a granulated target before application. This sealant sets rapidly when exposed to moisture, so consider the weather conditions before installing.  

Installation procedures vary depending on your roofing application. Before installing E-Curbs, be sure to read these reference data sheets for step-by-step guidelines. 

Learn more about Chem Link in their RoofersCoffeeShop® Directory or visit www.chemlink.com.   

]]> Video from Chem Link Introduces E-Curb® Systems https://www.rooferscoffeeshop.com/post/video-from-chem-link-introduces-e-curb-systems video-from-chem-link-introduces-e-curb-systems Mon, 28 Mar 2022 18:00:00 PDT

By Chem Link. 

Watch this video that details how to install the E-Curb penetration seal systems. 

Chem Link provides an extensive line of adhesives, sealants, systems and accessories used throughout the building envelope and adjoining surfaces. These products are used for both new construction and repair and maintenance. Learn more about Chem Link and its E-Curb Penetration Seal Systems in this quick video that shows you how to install the product. 

Specifications are available to install Chem Link E-Curbs on any granulated modified bitumen, built-up roofing system, PVC, EPDM, KEE and TPO single-ply membranes. Also, round E-Curbs are available in three-inch, four-inch, six-inch and nine-inch diameters. 

The video then walks you through the quick and easy installation process: 

  • Seal the penetration base and prime the penetration with M-1® structural sealant. This prevents the 1-Part® pourable sealer from leaking onto the roof and provides a tighter bond to the roof penetration. Put M-1 one inch higher than the top of the curb so that inspectors see that the roof penetrations were primed with the sealant. 
  • Apply a quarter-inch bead of M-1 structural sealant to the entire bottom perimeter and another bead down the middle of each curb section. 
  • After the M-1 has been applied to the bottoms of the curved sections, position the curb in place, and press it down firmly onto the roof, flattening out the M-1 under the flange of the E-Curb. 
  • Apply an additional bead of M-1 around the outside base perimeter into the slip joints until the bead is smooth. 
  • Then, fill the entire E-Curb with 1-Part pourable sealer. Do not fill the bottom of the E-Curb with grout, granules, roof cement or insulation to take up volume; this will void the curb warranty. One-Part pourable sealer is immediately watertight after pouring, and it skins over in about 20 minutes at 70°F at 50% relative humidity. 

E-Curbs can be installed on any commercial single-ply roof system. E-Curbs are bonded to the roofs and made watertight with M-1 structural sealant and 1-Part pourable sealer; these products are totally sound free, odorless and cannot shrink. 

E-curbed rubber is very flexible and can accommodate roof movement. It saves labor costs associated with mixing and human error and eliminates waste because unused portions can be sealed and used for the next job. It's immediately watertight, even though it's been freshly poured. 

Chem Link E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment. Watch the video and see for yourself how quickly you can replace old-style metal pitch pans with this product. 

Learn more about Chem Link in their RoofersCoffeeShop® Directory or visit www.chemlink.com. 

]]> Most-read Stories of 2021 https://www.rooferscoffeeshop.com/post/most-read-stories-of-2021 most-read-stories-of-2021 Thu, 20 Jan 2022 18:00:00 PST

By Karen L. Edwards, RCS COO 

Materials, milestones, product innovations and safety were some of the hottest topics in 2021. 

A new year is a good time to look back at the previous year to not only note the hot topics but to also learn from what happened as we move into 2022. One of the ways we do that at RoofersCoffeeShop® is to take a look at what some of our most-read stories from the year were. 

Our most-read story of the year was not surprisingly related to material shortages and supply chain issues. It’s definitely been a challenge for the industry and remains that way. Understanding the reasons behind the challenge and learning how others are navigating the issues is powerful information.  

Safety, giving back, award-winning projects, innovative products, growing markets, partnerships and being prepared were all part of the top stories of the year. We’ve listed them out below and linked to them for easy reading!  

20 - Preventing Heat-Related Illness and Injury 

19 - The Time-Saving Watertight Solution You’ve Been Waiting For 

18 - TAMKO Knoxville Plant Celebrates 45-Year Milestone Anniversary & Recognizes Retirement of Longtime Leadership 

17 - Material Shortages & Price Increases 

16 - Polyglass Announces New Code Approvals for Fire-Resistant Polystick® XFR Underlayment 

15 - Metal Roofing on the Rise 

14 - Roofers Hailed as Heroes for Extinguishing California Brush Fire 

13 - Be Selective When Choosing a Distributor 

12 - How Drones Make Jobsites Safer 

11 - Are You Prepared for an Emergency? 

10 - JobNimbus and Sunlight Financial Partnership is a Match Made to Grow Your Business 

9 - The Case to Use Grace Ice & Water Shield® is Watertight 

8 - Updating your Marketing Plan? 

7 - Is That Capri Sun on Your Roof? 

6 - ABC Supply Co. Inc. Recognized as Top Workplace for 15th Consecutive Year 

5 - International Roofing Expo Opens Its Call for Presentations 2022 

4 - ARMA Announces Winners of 2021 Excellence in Asphalt Roofing Awards 

3 - Employee Satisfaction is Essential for Long-term Success 

2 - ARMA Releases 2020 Q4 Report on Asphalt Roofing  Product Shipments 

1 - Roofing Industry Experiencing Price Increases 

Get the top news each week in your inbox when you sign up for the Week in Review email newsletter.

]]> RoofersCoffeeShop® Will Be at IRE 2022, Will You? https://www.rooferscoffeeshop.com/post/rooferscoffeeshop-will-be-at-ire-2022-will-you rooferscoffeeshop-will-be-at-ire-2022-will-you Mon, 17 Jan 2022 18:00:00 PST

By Cass Jacoby, RCS Reporter.  

IRE promises to be one of the biggest events of the year, check out who will be at the expo! 

This year’s International Roofing Expo (IRE) promises many exciting events, products, classes and more. The expo will take place February 1-3 in New Orleans at the Ernest N. Morial Convention Center.  

RoofersCoffeeShop® will be on the beat, sharing information and broadcasting live on YouTube. Additionally, you will find President Heidi J. Ellsworth moderating a panel on how to work with young people who are interested in roofing. The session takes place Tuesday at 7:45 a.m. - 9:15 a.m. CT 

The Coffee Shop will join many great manufacturers, distributors and associations as they share new ideas with roofing contractors. Make sure you stop by our booth, number 249, and visit our RoofersCoffeeShop partners too:  

Don’t miss out, register today for IRE 2022!

]]> Chem Link® Experts to Showcase Flagship Polyether Product at FRSA'a 99th Annual Convention and Expo https://www.rooferscoffeeshop.com/post/chem-link-experts-to-showcase-flagship-polyether-product-at-frsaa-99th-annual-convention-and-expo chem-link-experts-to-showcase-flagship-polyether-product-at-frsaa-99th-annual-convention-and-expo Sat, 17 Jul 2021 12:00:00 PDT

Connect in-person with Chem Link to discuss industry-leading Miami-Dade certified adhesive/sealant.

Chem Link, Inc., a formulator and manufacturer of high-performance, environmentally friendly construction adhesives, waterproofing sealants, coatings and related building products, announces its participation at the FRSA’s 99th Annual Convention and the Florida Roofing & Sheet Metal Expo at the Gaylord Palms in Kissimmee, Florida, July 21-23, 2021.

Featuring over 230 exhibitors showcasing their products and services, the FRSA Expo is the largest regional roofing expo in the country, making it a vital resource for any roofing and sheet metal contractor. The Expo is free for all roofing professionals and features daily cash prizes, the Foundation Auction, and special events in the Lounge.

This year at Chem Link’s Booth #222, you will have the opportunity to connect in person with Chem Link experts and learn about the latest polyether adhesive/sealant technology. Chem Link will highlight its M-1® Universal Adhesive & Sealant, a solvent-free, versatile Miami-Dade certified product with the ability to form a tough, waterproof seal on most roofing materials.

Benefits of M-1:
  • It adheres to almost everything so that you can use it everywhere!
  • It contains 100% solids that don’t shrink.
  • Because it is moisture-curing, you can use it in the rain for emergency roofing or other applications like leaking condensation pans or pools.
  • It is paintable and available in numerous color choices, as well as in a true clear option.
  • It’s both an adhesive as well as a sealant.
  • It skins over in just 20 minutes and is non-flammable, non-staining, non-sag and non-slump.
  • Applies down to 32°F/0°C
  • Continuous service at 200° F/93°C

M-1 is made in the USA, as are most of Chem Link’s raw materials – the polymers, the cartridges and the boxes.

Register now to attend the FRSA Expo or contact Chem Link to learn more about its innovative roofing and waterproofing products.

About Chem Link

Founded in 1990, Chem Link focuses on meeting the pressing needs of contractors, consumers and industries with its high-performance, environmentally friendly construction adhesives, waterproofing sealants, coatings and related building products. In 2016, Chem Link joined the SOPREMA family, growing its values as an idea organization, dedicated to innovation and problem-solving with a vast knowledge of the climates, testing standards, construction issues, government regulations and business conventions throughout North America. An ISO 9001:2015 certified company, Chem Link continues to grow and invest in its manufacturing processes to provide its customers with quality products and customer service. For more information about Chem Link, call 800.826.1681 or visit chemlink.com.

]]> Top March Stories: Roofing Award Winners, Integrations and Influencers https://www.rooferscoffeeshop.com/post/top-march-stories-roofing-award-winner-integrations-and-influencers top-march-stories-roofing-award-winner-integrations-and-influencers Mon, 19 Apr 2021 06:00:00 PDT

By Karen L. Edwards, RCS Editor. 

Here’s what’s trending on RoofersCoffeeShop®(RCS) this past month. 

March just blew through and here we are looking back at the top articles of the month. Three of our top 10 are about women in the industry making big career moves, breaking stereotypes and excelling in roles traditionally not held by women.  

The labor shortage and Roofing Day were hot topics for everyone in March. We hope to see changes coming down the road from our participation and the meetings that we had with our legislators.  

New initiatives are always exciting, so we were happy to see that the RCS community was interested in learning more about AskARoofer.com, our new site that connects property owners with roofing contractors to get their roofing questions answered.  

Our top stories cover how to get more insurance restoration work this year, a new integration with Duro-Last and Estimating Edge, the announcement of our 2021 Roofing Influencers and the ARMA Excellence in Asphalt Roofing Award winners.    

If you didn’t get the chance to read any of these articles yet, follow the links below to check them out.  

Honorable Mention (#6-#10) 

10 - GAF Taps Alma Garnett to Lead Commercial Roofing Sales 

9 - Skilled Worker Shortage Needs to Be Discussed at Roofing Day 

8 - Drafter Cindy Hillegass Breaks Glass Ceiling in Construction Industry 

7 - Meet Lydia Lane, Answer Me This! Winner 

6 - RoofersCoffeeShop® Announces the Launch of AskARoofer™ 

Read the Top 5 articles: 

5 - Help Your Customers Save Money on Solar Installation 

4 - RoofersCoffeeShop® Announces 2021 Roofing Influencers 

3 - How to Win More Insurance Restoration Roofing Jobs for 2021 

2 - Duro-Last®, Inc. Announces Participation in Estimating Edge 

1 - ARMA Announces Winners of 2021 Excellence in Asphalt Roofing Awards 

Get the top news each week in your inbox when you sign up for the Week in Review email newsletter.  

]]> Top February Stories: Price Increases, Recognizing Achievement and New Products https://www.rooferscoffeeshop.com/post/top-february-stories-price-increases-recognizing-achievement-and-new-products top-february-stories-price-increases-recognizing-achievement-and-new-products Mon, 22 Mar 2021 21:00:00 PDT

By Karen L. Edwards, RCS Editor.

Here’s what’s trending on RoofersCoffeeShop® (RCS) this past month.

February saw a lot of us interested in the rising prices of materials, not to mention the shortages. Our most-read article was written by RCS Partner Heidi Ellsworth as she investigated the reasons behind the price increases. You don’t want to miss that!

Two of our top five focused on topics that it seems are always a challenge – having enough time! The articles highlight a new time-saving waterproofing solution and some strategies to better manage your time overall.

There are so many good people in our industry who deserve recognition that it’s no surprise that the announcement of the finalists for the Roofing Alliance MVP Awards was up there in the top five. As usual, the rankings were very close, so we chose to include the top ten for your reading pleasure.

If you didn’t get the chance to read any of these articles yet, follow the links below to check them out.

Honorable Mention (#6-#10)

10 - SRS Distribution Recognized by Forbes

9 - Roofing and Exterior Construction Industry Leaders will Come Together Via a Virtual Event

8 - Roofing Shingles Made for Millennials

7 - Trade Shows Help Build Brand Awareness

6 - TAMKO Launches Innovative Shingle Series Featuring Two New Products and All-New Contractor Loyalty Program

Read the Top 5 articles:

5 - The Biggest Marketing Plan Mistake, And How To Avoid It

4 - 5 Strategies for Better Time Management

3 - 2020-2021 Most Valuable Player (MVP) Award Finalists Announced

2 - The Time-Saving Watertight Solution You’ve Been Waiting For

1 - Roofing Industry Experiencing Price Increases

Get the top news each week in your inbox when you sign up for the Week in Roofing email newsletter.

]]> Help Your Customers Save Money on Solar Installation https://www.rooferscoffeeshop.com/post/help-your-customers-save-money-on-solar-installation help-your-customers-save-money-on-solar-installation Mon, 01 Mar 2021 10:00:00 PST

By Chem Link.

Inform your customers of the many solar tax incentives available across the U.S. so they can install the solar system of their dreams.

Across the U.S., cities and states are increasingly turning towards renewable energy sources instead of fossil fuels. More and more homeowners and business owners alike are beginning to install solar energy systems because of their many benefits, like environmental friendliness and energy bill savings. Despite this, many people are turned away by the cost of solar panel installation. Fortunately, there are many tax incentives available that are making solar panels accessible to everyone.

Federal tax credit

One of the biggest incentives available for both residential and commercial building owners for installing solar energy systems is a federal tax credit called the Solar Investment Tax Credit (ITC). This credit can help to offset a large portion of your customer’s investment by allowing a 30 percent deduction from their federal taxes for the installation cost.

The ITC was established as part of The Energy Policy Act of 2005. Since then, it was extended a number of times and is now set to expire at the end of 2023. Although the program now offers a 30 percent deduction, starting in 2020, we began to see that percentage decrease each year until it ultimately expires in 2023. With the looming percentage deductions, now is a great time to encourage your customers to dive in and take advantage of the full 30 percent deduction. 

Net metering

Net metering is another incentive opportunity that is available in many states. If a state participates in a net metering program, customers will only be billed for the net energy used each month. This amount is determined by calculating the difference between the energy produced by the solar panel system and the energy consumed by the building throughout the month. In some areas, this could actually result in a credit for the excess energy a system creates. Net metering can save hundreds of dollars each year, but research must be done to determine if your state participates and outlines any stipulations.

Solar renewable energy certificates

Solar Renewable Energy Certifications (SRECs) are another option available in some states. In these states, utility companies are required to produce a certain amount of energy from renewable resources each year. If utility companies do not produce enough energy in this manner, they are charged a fee. This is where the SRECs come into play. They can purchase SRECs from individuals and companies who have solar energy systems at a lower cost than the fee they would incur. This saves them money while putting money in your pocket. Again, to ensure you are providing your customer the most accurate information, research must be done to determine if your state participates and outlines any stipulations.

State-level incentives

As the push toward clean renewable energy continues, many cities and states are offering incentive programs to residents and organizations for installation of solar systems. Not every state has jumped on the bandwagon yet, but several states offer incentives in the form of grants, loans or tax exemption programs. We will discuss some of the incentives that are available with a focus on the commercial building industry in a few states across the United States. There are numerous incentives available outside of the scope of this article. Additional research on your specific state and project type should be done to ensure you are providing optimal savings for your customer’s project.

California

Property Assessed Clean Energy (PACE): The PACE incentive is a national incentive that is adopted throughout states in the United States. Many cities and counties in California offer the PACE program to both residents and commercial building owners.

Florida

Property Assessed Clean Energy (PACE): Florida is another one of the states that participates in the PACE incentive. PACE is available to both residential and commercial building owners and helps offset installation costs by offering a low-cost, long-term project financing option.

Florida State-Specific Incentives: In Florida, there is no sales tax on solar energy systems. In addition, commercial buildings can receive 80 percent property tax abatement for investing in renewable energy property.

Delaware

The Green Energy Program: Some utility companies and municipal governments within the state of Delaware offer their customers grants for installing solar panels on their buildings. Grant requirements and amounts may vary, depending on the company and system type. There are resources available to ensure your customers are receiving the maximum incentive.  

Energize Delaware Solar Loan: This program offers a low-interest loan to customers who own renewable energy sources. The amount of the loan can range anywhere from $5,000 to $30,000. Interest rates on the loans are 3.9 percent with a term of up to 10 years.

South Carolina

Energy Efficiency Revolving Loan Program (EERL): This loan program is designed for private business, government agencies and 501(c)(3) organizations. It is meant to assist in energy-efficiency improvements for long-term cost reductions. These loans can range from $50,000 to $1 million per fiscal year and have a maximum loan term of 10 years.

ConserFund Loan Program: This program is designed specifically for local governments and 501(c)(3) organizations. It is meant to assist in energy-efficiency improvements for long-term cost reductions. These loans can range from $25,000 to $500,000 per state fiscal year. For eligible government borrowers, the first payment is not due until one year after the completion of the project.

ConserFund Plus Program: Designed for state agencies, public colleges and universities, technical schools, and public school districts, this program is structured similarity to the previously mentioned ConserFund Loan Program. The main difference between the programs is that the funding is allocated as a 70 percent loan and 30 percent grant. This program also requires adherence to the American Recovery & Reinvestment Act (ARRA), Buy American and Davis-Bacon wage provisions.

Wisconsin

Focus on Energy - Solar Electric System Incentive: This program works with many local utility companies to provide incentives for installing solar electric systems.  There are some requirements to determine eligibility for this program, including installing a qualified system model; the system must be at least 0.5 kWDC, installed 45 degrees south, with a panel tilt between 10-50 degrees and have less than 10 percent obstruction shading. If a commercial project meets these qualifications, it could earn up to $4,000 in incentives through this program.

Washington

Renewable Energy System Cost Recovery Incentive Payment Program: This program was designed to help offset the cost of installing a solar system for both residential and commercial projects. It offers up to $5,000 per year for qualified candidates. The exact amount received is determined by the amount of electricity produced by the system from July 1 to June 30 and is based on all systems that are owned, not per system.

In this article, we are only scratching the surface when it comes to solar energy incentive programs. Several of the states listed have programs beyond what is mentioned, and the list of states offering programs is much larger. Solar energy is here to stay and will only continue to grow as our country moves toward renewable energy dependency. So, what is holding your customers back? Now is the time for them to take advantage of the incentives and begin reaping the benefits that solar energy has to offer.

Learn more about Chem Link in their RoofersCoffeeShop® Directory or visit www.chemlink.com.

Original article source: Chem Link

]]> Attend IRE Virtually https://www.rooferscoffeeshop.com/post/attend-ire-virtually attend-ire-virtually Wed, 24 Feb 2021 18:00:00 PST

By Lauren White, RCS Assistant Editor. 

Log in March 2-4, 2021 for educational sessions, a virtual tradeshow, whiskey and cigar pairings and more! 

No matter where you are in the world, make sure you’re near your computer March 2-4, 2021 for the virtual portion of the International Roofing Expo (IRE).  This virtual three-day event will take place in addition to the physical trade show that is scheduled for August 10-12 at the Mandalay Bay Convention Center in Las Vegas, Nevada.  There’s something for everyone, so don’t miss out! 

What should you expect from the 2021 Virtual Conference and Expo?  More than 20 live and on-demand educational sessions, an exhibit and product directory and a networking platform.  Attendees and exhibitors will be able to chat, video call and more to engage with one another. 

“We are thrilled about the addition of a complementary virtual event and being able to provide the industry with more of the education and content they look forward to every year,” said Ray Giovine, group director for the International Roofing Expo / Informa Markets. 

Industry experts will share their knowledge with attendees through various educational sessions.  There are six different tracks of sessions so you can conveniently find the education you need.  The tracks include: Business, Legal/HR, Technical, Workplace safety, Windows and siding, Exhibitor seminars.  Take a look at the schedule to see what you have to look forward to. 

Tuesday, March 2 

Each day will start with a Ask the Experts Live session.  On Tuesday, Reid Ribble, CEO of National Roofing Contractors Association (NRCA), is the opening keynote speaker and will discuss “The Industry in a Post-Pandemic World,” taking viewers through what happened during an unprecedented 2020, in addition to discussing what will come next. 

Our very own RCS partner, Heidi J. Ellsworth, will present “How the Industry is Dealing with the Labor Shortage by Embracing Diversity, Technology and the Next Generation” with Alison LaValley, vice president of strategic projects and development for NRCA, in addition to Roscoe Green, Cotney Construction Law partner.  During the session, the team will share current roofing initiatives from the NRCA Diversity and Inclusion committee, Roofing Alliance, National Women in Roofing (NWIR) and Roofing Technology Think Tank (RT3). 

“NRCA Technical Operation Committee: Steep-Slope Roofing Development and Issues” will be presented by Mark Graham and Maciek Rupar.  The two will share an overview of what NRCA’s Technical Operations Committee has identified as issues in steep-slope roofing. 

Ryan Groth, founder of Sales Transformation Group, will share how companies can confidently forecast revenue in his session, “How to Create Sales Predictability by Transforming Your Team.” 

There will also be two on-demand sessions presented by NRCA that will be available starting on March 2.  Reid Ribble will present “Training and Sustaining Your Workforce,” and Bill Good and Dhaval Gajjar will present “A College-Level Course on Roofing! Who Knew?” 

Wednesday, March 3 

Join a panel of experts to answer roofing industry technical issues in the Technical Q&A live session.  During this hour, you’ll have an opportunity to share your experiences and have your questions answered.  

Viewers will learn ways to train staff who are working remotely from Anna Chapman Anderson, Owens Corning Business Accelerator, during her session, “Jumpstarting a Virtual Training System."   

During “Empowerment in the Face of Uncertainty: Empowerment Through Belief of Self,” presented by NWIR, Jill Keuth will discuss how women are rising and leading in the industry, in businesses and in their communities and homes. 

Thursday, March 4 

Start your day with the Ask the Experts Live session, “Current COVID-19 Legal Issues.”  Join Trent Cotney and John Kenney from Cotney Construction Law, Michelle Boykin, the COO and integrator of Rackley Roofing Company and Ken Kelly, president of Kelly Roofing.  This panel will discuss legal issues that impact roofing professionals. 

Learn how to protect profit margins and use a higher price to increase sales from John DeRosa of SRS Distribution, during “Advanced Pricing Strategies.” 

During “NRCA Technical Operations Committee: Low-Slope Roofing Development and Issues,” Mark Graham, NRCA vice president of technical services, will share low-slope roofing issues that have been identified by NRCA’s Technical Operations Committee. 

“Ways to Maximize Communication and Collaboration Tools,” presented by NWIR, will provide attendees with tips on how to improve communication in the field and increase efficiency by utilizing technology. 

When you’re not attending educational sessions, check out the virtual trade show from 10 a.m. to 6 p.m. EST each day.  Make sure you stop by our RoofersCoffeeShop® booth, and visit our RCS partners too: 

See the full list of exhibitors here.   

Even though IRE is virtual, there will still be opportunities for networking and fun!  Tuesday evening, join in for a whiskey and cigar bar tasting, hosted by SRS Distribution and Versico.  Leslie Sbrocco, the wine/spirits expert for NBC’s Today Show and the Emmy-Award winning host of 100 DAYS, DRINKS, DISHES & DESTINATIONS, will present a whiskey and cigar pairing.  Leslie will share tips for pairing a variety of whiskeys and bourbons to the perfect cigar.  Log in early because the first 200 people to attend will receive a special gift!  You’ll need to practice your poker face for Wednesday’s Virtual Poker Night sponsored by NWIR.  Socialize and network with your fellow roofing professionals all while having some fun!  And on the last day of the conference, enjoy a special presentation of Cirque du Soleil.  They will perform two of their must-see shows, Mystère and “O”! 

Get your free pass to the virtual expo compliments of RCS. 

]]> The Time-Saving Watertight Solution You’ve Been Waiting For https://www.rooferscoffeeshop.com/post/the-time-saving-watertightsolutionyouve-been-waiting-for the-time-saving-watertightsolutionyouve-been-waiting-for Mon, 08 Feb 2021 18:00:00 PST

By Chem Link. 

Chem Link’s E-Curb® System provides a permanent, watertight seal around any penetration shape or size. 

E-Curbs consist of tough, molded forms that bond to the roof around virtually any kind of penetration. This product works by creating a cavity, which is later filled with non-shrinking rubber sealant. The full process creates a tight, unified bond that fully integrates with the penetration. 

E-Curbs offer a simple installation process that can save your crews time and labor on the jobsite. The system consists of three essential components: E-Curb, weatherproof molded forms, M-1® Universal Sealant/Adhesive for bonding the forms to the roof, and 1-Part®, a self-leveling, pourable sealant for filling the forms. 

Why are E-Curbs beneficial? 

Roof penetrations are the most common source of leaks. Solar panels are the perfect example of a penetration that could, in time, create an avenue for water. When using penetration seals such as pitch pans, rain caps and boots, the repeated cycle of heat, cold, moisture, ponding water and ultraviolet rays will inevitably degrade these seals. One of the primary benefits to the E-Curb product line is that they offer an economically friendly option that will withstand these elements and can last the lifespan of the roof. These products are made to turn the weakest part of the roof into the strongest. 

In addition to preventing roof leaks, E-Curbs offer a quick and easy installation. These products are so easy to install; there is no need to bring in a subcontractor to do the installation, resulting in cost savings and expediting project timelines. Once your crews are trained on the easy three-step process, it only takes about fifteen minutes to install each curb. To make it even simpler, the curbs offer a variety of size and shape options to fit any project needs. 

E-Curbs for solar applications 

It is important to ensure your solar rooftop is properly waterproofed during installation. If water has the chance, it will infiltrate the roof and could cause major damage down the road. E-Curbs are an excellent solution for solar panel applications and will help eliminate the need to replace penetration seals in the future. Because E-Curbs utilize reactive adhesives and sealants that form a tough elastomeric waterproofing seal, no flashing or mechanical attachments are required, leaving no room for water intrusion to occur. 

The simple installation process will help your crews stay on track and complete projects within the designated timeline. With the easy installation, your crews can apply the curbs to the solar frames during their normal installation process, adding no more than fifteen minutes per curb and producing a tough and durable solar mounting. 

E-Curbs are a great solution for solar roofing projects and will provide you with strong, long-lasting rooftop solar panels. When installed properly, the E-Curbs will not damage the roof and can prolong the initial roof investment. So, by offering the proper training to your crews, you can speed up project timelines, save on subcontracting costs and provide a penetration seal that will not damage the current roof. So, why not take advantage of these nonintrusive products on your next solar project? 

Learn more about Chem Link in their RoofersCoffeeShop® Directory or visit www.chemlink.com. 

Original article source: Chem Link 

]]>